Bend-O-Matic Plans
Tube Bender Designs | Building a Tube Bender | Bend-O-Matic Plans
I've christened my tube bender the Bend-O-Matic (Was going to be Bendertron but changed my mind). Hope it gives someone a bit of inspiration...
The finished product
The pieces
In action bending a roll hoop
AutoCad R14 Design file
(This is a 3D Drawing)
Plan sheets
I did these up fairly quickly so if anything's missing you'll have to look at the AutoCAD file to work it out. Just print each one onto an A4 sheet and go to it...!